Oil Filter And Pan Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

25. Check the alignment of the detent roller and the manual
lever quadrant.
26. Connect the solenoid wiring as detailed below:
Solenoid 1 - red
Solenoid 2 - bIue
Solenoid 3 - yellow
Solenoid 4 - orange
Solenoid 5 - green
Solenoid 6 - violet
Notice
All hardware must be correctly installed and torqued
to specification.

Oil Filter and Pan Assembly

Notice
• Replace the filter whenever rebuilding a transmission
where a significant amount of mechanical damage has
occurred.
• To aid the assembly of the pan gasket, use a small
amount of Vaseline at the pan/gasket interface. This
ensures that the gasket remains on the pan ridge. Do
not over torque pan bolts as this may distort the pan
and cause leaks.
• Ensure that the internal line pressure plus in the valve
body is fitted.
1. Lubricate the oil filter sealing ring with automatic
transmission fluid.
2. Carefully assemble the oil filter to the valve body. The
spigot must not lean on one side while being fitted.
3. Secure the oil filter assembly with the retainer.
4. Check that the magnet is located in the dimple in the
corner of the oil pan.
5. Assemble the gasket on the pan lip. The gasket must
be free of any distortion when installed.
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
3A2-199
Y220_3A22A0
Y220_3A2510
Y220_3A22B0
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN