Auto Switch - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

10B-8
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Auto Switch

Press this switch to turn on the system. On the VFD, the
AUTO indicator will be comes on. In 'AUTO' mode, the fan
speed, air flow and air vent will be automatically controlled
according to the preset temperature.
Y220_10B010
Temperature Control Switch
The temperature can be adjusted between 18°C ~ 32°C.
• Turn the switch counterclockwise to lower the temperature
by 0.5°C of decrement.
• Turn the switch clockwise to raise the temperature by
0.5°C of increment.
Y220_10B011
Fan Speed Control Switch
The fan speed can be adjusted in 6 stages.
• Turn the switch counterclockwise to reduce the fan speed.
• Turn the switch clockwise to increase the fan speed.
When the switch is operated, the fan speed shows up as
bar and "AUTO" goes out.
Notice
• If the air conditioner switch is turned off, the air
conditioner does not work even when the fan switch
is operated. However, the air will flow due to fan
Y220_10B012
operation.
• To prevent battery discharge, do not run the fan for
over extended period of time if the engine is not
running.
HEATER & VENTILATION SYSTEM
REXTON SM - 2004.4