Oil Pump Pressure - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

6C-24
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

OIL PUMP PRESSURE

Check the oil pump pressure to locate any defect in oil pump.
Notice
Before checking the pressure, check the oil level and belt
tension. Prepare the empty container to collect the spilled
oil during the service.
1. Unscrew the pressure line fitting in power steering pump.
2. Install the pressure gauge between the power steering
pump and the power steering oil pressure line.
3. Place the shift lever to neutral position.
4. Apply the parking brake.
Y220_06C050
5. Open the valve in pressure gauge.
6. Start the engine and let it run at idle speed.
7. Turn the steering wheel several times so that the oil
temperature reaches to normal operating level.
8. Fully close the valve in pressure gauge and measure the
oil pressure.
Notice
To prevent internal damage, do not close the gauge
valve over 10 seconds.
Pump relief valve pressure
9. Measure the oil pressure with the gauge valve fully closed.
Pump pressure at no load
10. If the pump pressure is in specified range, the pump is
normal. If not, replace the power steering pump.
53 ~ 58 kg/cm 2
3 ~ 5 kg/cm 2
POWER STEERING
REXTON SM - 2004.4