SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 720

3A2-172
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Lift the separator plate and gaskets from the upper valve
body.
8. Remove the five nylon check balls exposed in the valve
body.
9. Remove the retaining plate, plug, spring and re-verse
lockout valve.
Y220_3A2840
10. Remove the filter (1) and the large nylon check ball (2)
from the lower valve body.
11. Remove the retaining plates and pins from the 1-2, 2-3,
3-4, BAR and CAR valves. The pins can be removed with
a magnet.
Notice
Once the pins are removed, the plates are loose in the
valve body and will drop out when the valve body is
turned over.
12. Remove the 1-2, 2-3 and 3-4 shift valves.
Y220_3A285A
13. Depress the 4-3 sequence valve plug and remove the
retaining plate.
Notice
The plug is preloaded by the spring and may
unexpectedly fall out of the valve body.
14. Remove the plug, spring and valve
Y220_3A2860
15. Depress the solenoid 5 valve. Remove the retaining in
and remove the valve, damper guide and spring.
Notice
The valve is preloaded by the spring and may
unexpectedly fall out of the valve body.
16. Depress the line pressure release valve, remove the
retaining pin, disc (if fitted), spring and valve.
17. Drive out the retaining pin and remove the spring and ball
check valve adjacent to the BAR valve.
Y220_3A2870
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4