Transmission Adaptor; Backup Lamp Switch - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3B-74
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

TRANSMISSION ADAPTOR

Disassembly and Reassembly
1. Remove the reverse idler retainer ring.
Y220_03B180
2. Remove the components as follows and install in the
reverse order of removal.
• Unscrew the reverse lock nut and idler bracket bolts
and remove the bracket and spacer.
• Remove the reverse idler gear and the needle bearing.
• Pull out the dowel pin and remove the reverse idler
shaft.
Installation Notice
Reverse idler bracket bolt
Y220_03B181

BACKUP LAMP SWITCH

Remove the backup lamp switch with 24 mm wrench. Apply
the sealant when installing.
Installation Notice
Sealant
Tightening torque
Y220_03B182
Reverse lock nut
LOCTITE DRI LOC 200
30 ~ 40 Nm
TSM54/52 MANUAL TRANSMISSION
17 ~ 26 Nm
70 ~ 100 Nm
REXTON SM - 2004.4