SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 608

3A1-56
Trouble
Defectives
Code
P2101 1-2, 4-5 shift solenoid valve - short
P2102 Defective 2-3 shift solenoid valve
P2103 2-3 shift solenoid valve - short
P2104 Defective 3-4 shift solenoid valve
P2105 3-4 shift solenoid valve - short
P2106 Defective lockup clutch solenoid valve
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
- When 1-2 or 4-5 shift solenoid valve is defective.
- Measure the resistance of 1-2 or 4-5 shift solenoid valve (turn the IGN
OFF, then disconnect TCU connector).
• TCU connector terminals: B12, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
- When 2-3 shift solenoid valve is defective.
- Measure the resistance of 2-3 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B10, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
- When 2-3 shift solenoid valve is defective.
- Measure the resistance of 2-3 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B10, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
- When 3-4 shift solenoid valve is defective.
- Measure the resistance of 3-4 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B11, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
- When 3-4 shift solenoid valve is defective.
- Measure the resistance of 3-4 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B11, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
- Measure the resistance of lockup clutch solenoid valve (turn the IGN
OFF, then disconnect TCU connector).
• TCU connector terminals: B9, B3
• Specified value: 2.5 ± 0.2 Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
Action
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4