Checking The Braking Force - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

INSPECTION

CHECKING THE BRAKING FORCE

Inspect the parking brake as following;
1. Count the number of the clicks (notches) when pulling
up the parking brake with 19 kg of force.
Specified Notch
2. If the clicks are over or below the specified value, adjust
the clicks to the specified value with the parking brake
adjusting nut.
3. Check the parking brake force after adjustment.
4. If the specified parking brake force cannot be achieved,
check the parking brake lever and cable. Replace the
components if needed.
Notice
Never park the vehicle only with the parking brake
on the stiff hill. It may cause roll down of the vehicle
due to release of the parking brake. Must put the
wheel blocks under the wheels
PARKING BRAKE
REXTON SM - 2004.4
5
8D-9
Y220_08D014
Y220_08D015
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN