REASSEMBLY
1. Install the steering pinion gear.
1) Install the retaining ring.
2) Install the needle bearing.
3) Install the pinion shaft seal by tapping it with a long
and flat end drift.
2. Tighten the steering pinion lock nut (4) with a specified
tightening torque.
Notice
Make sure that the pinion bearing is not offset with
the steering pinion lock nut.
3. Tighten the steering pinion dust cover (5) with a specified
tightening torque.
1) Install the retaining ring (6).
2) Install the plastic dust cover (7).
POWER STEERING
REXTON SM - 2004.4
6C-17
Y220_06C029
Y220_06C030
Y220_06C031
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN