Rack Gear Shaft - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

INSPECTION

Rack Gear Shaft

1. Check the rack gear for deformation and damage.
• Place the V-blocks (1) on the flatten plate.
• Put the rack gear (2 and 4) on the V-blocks.
• Measure the straightness of rack gear with a dial
gauge.
• Check the rack gear for abnormal wear and damage.
2. Check the steering pinion gear for damage.
• Check the pinion gear (1) for abnormal wear and
damage.
• Check the bearing (2) for looseness and operation.
3. Check the tie rod end and the rack and pinion bellows for
damage.
• Check the tie rod end boot (1) for crack and abnormal
wear.
• Check the rack and pinion boot (2) for crack and
abnormal wear.
4. Check the steering gear housing (a) for crack, distortion
and abnormal wear.
POWER STEERING
REXTON SM - 2004.4
6C-19
Y220_06C035
Y220_06C036
Y220_06C037
Y220_06C038
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN