Rpm Sensor - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

RPM Sensor

1. Leaf spring
2. Valve body
Function
The RPM sensors are fixed to the shell of the hydraulic control unit via the contact tabs. A leaf spring, which rests
against the valve body, presses the RPM sensors against the transmission housing. This ensures a precise distance
between RPM sensors and impulse rings. RPM sensor (n3) detects the speed of the front sun gear and RPM sensor
(n2) detects the speed of the front planetary carrier. If the speed sensor is defective, the transmission is operated in
emergency driving mode. Below table shows the detection of speed sensor.
Gear N2
•
1
•
2
•
3
•
4
•
5
•
R (S mode)
•
R (W mode)
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
3. Pulse ring
N3
-
•
•
•
-
-
•
RPM RPM
sensor (n3) sensor (n2)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3A1-31
Y220_3A1033