Table of Contents
Advertisement
ELECTRONIC COMPASS
1. It indicates 16-direction by intervals of 22.5° according
to the vehicle's driving direction.
• Direction:
- E: East
- W: West
- S: South
- N: North
• When the first equipped to the vehicle or the battery
is exchanged, you have to perform calibration by
circulating your vehicle. If not, there will be misreading
in direction.
Turning Calibration
1. If you press the adjustment switch for 0.5~5 seconds,
the current direction flashes.
2. Turn the vehicle over 1 complete circle within 128 seconds
slowly, then the calibration will be accomplished.
3. When the calibration is finished, the vehicle's new
direction will be indicated.
Note
• If the compass continues to flash, turn again slowly
until it goes off.
Release Conditions for Turning
Calibration
• When the adjustment switch is pressed over 0.6 second.
• When the vehicle is not turned within 128 seconds after
calibration mode started.
Warning for turning
When the vehicle has been turned out of the specification due
to external elements, direction indicator flashes to inform you
that there are abnormal signals.
Notice
• Warning for turning occurs if the abnormal signals has been received more than 5 minutes continuously,
however, it is not the malfunction of the vehicle and returns to normal condition if the external magnetic field
becomes to normal.
• The direction indicator may be delayed when you drive on sharp corner, however it is normal, not malfunction.
• On the place where the terrestrial magnetism is dispersed, the compass may not indicate the correct direction,
however, when you leave the place, it returns to normal. (Examples: in the tunnel, parking lot in a building,
underground parking lot, building complex, above the subway lines, near to substation, under the power
lines of the electric railways, etc.)
INSTRUMENT PANEL AND MULTI-METER
REXTON SM - 2004.4
9C-31
Y220_09C279
Y220_09C280
Y220_09C281
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Hide quick links:
Advertisement
Table of Contents
