SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 973

Installation
Clean the disassembled axle shaft and check it damage or
wear.
1. Check the rear axle shaft spline and insert it into the
rear axle housing.
2. Install four axle housing flange bolts and washers with
retainer plate.
Tightening torque
3. Fit the plastic plugs into the rear axle flange and install
the dust shield.
Tightening torque
4. Install the brake disc and caliper assembly.
Tightening torque
5. Connect the parking brake cable and install the tire.
REAR AXLE
REXTON SM - 2004.4
50 ~ 65 Nm
4 ~ 8 Nm
85 ~ 105 Nm
4B-9
Y220_04B010
Y220_04B011
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN