Relative Altimeter; Mode Setting Of The Relative Altimeter; To See The Destination’s Altitude; Coming Out Order Of The Road Signs - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

9C-34

RELATIVE ALTIMETER

To See the Destination's Altitude
1. Enter the altitude of the point where you know the altitude from the sea level.
2. The indicated value on the destination is the altitude from the sea level.
Notice
The altimeter operates by using changes of atmospheric pressure.
So, sometimes, the indicated altitude may different due to changing atmospheric pressure in the
same place, however, it is normal, not malfunctions.

Coming Out Order of the Road Signs

• If the vehicle stops, the currently turned off area of the signs will remain as it is.
• If the vehicle drives off again, the next area from the turned off signs will start to flash.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Use this to see the specific area's altitude; it shows the spe-
cific area's relative altitude based on the current altitude of the
vehicle.
Mode Setting of the Relative
Altimeter
1. Press the "MODE" switch over 0.5 second.
2. To see the difference of the altitude Set the vehicle's
altitude to 0 by pressing "UP" and "DOWN" switches
simultaneously over 1 second.
Y220_09C285 → read the indicated altitude after arrival.
INSTRUMENT PANEL AND MULTI-METER
REXTON SM - 2004.4