SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 858

3C-14
Installation notice
1. Install in the reverse order of removal. Adjust pedal
stroke after installation.
Notice
1. Apply long-life grease (T/M DBL 6611.00) to
the connections.
2. Remove foreign materials.
3. Keep the tightening torque.
4. Replace the bushings with new ones.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5. Unscrew the mounting bolts and remove the clutch pedal
bracket.
Y220_03C024
Fulcrum bolt/nut
Bracket mounting bolt
Inspection and adjustment
1. Pedal Stroke (A)
Maximum pedal stroke
2. Pedal Height (B)
Height (from carpet)
Notice
To adjust the pedal stroke, loosen the lock nut (C) of
the stopper bolt (D) and turn the stopper bolt until
the stroke is correct. After adjustment, tighten the
lock nut.
3. Pedal Free Play (E).
Notice
To adjust the pedal free play, loosen the lock nut (F)
of the master cylinder and turn the push rod until the
free play is correct.
4. Check the fulcrum bolt and the bushing for wear, the
Y220_03C025
pedal for bending and the spring for damage.
Description Tightening Torque
Stopper bolt
Free play
16 ~ 22 Nm
8 ~ 18 Nm
16 ~ 22 Nm
158 mm
192 ± 5 mm
5 ~ 10 mm
CLUTCH
REXTON SM - 2004.4