SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1251

INSPECTION OF CABLES AND WIRES
1. Check the connections for looseness and rust.
2. Check the terminals and wires for corrosion due to electrolyte.
3. Check the circuit for open.
4. Check the wire insulation. Check the cover clothing of the wire for damage, crack and deterioration.
5. Check if any electric continuity can be transferred to other metal components such as vehicle body.
6. Check if the continuity exists on the bolt and vehicle body in ground connection.
7. Check the wire arrangement.
8. Securely fasten the wiring harnesses not to contact to a sharp edge and hot elements (exhaust manifold and
pipes).
9. Keep the proper clearance between the wire harness and the moving components such as fan pulley and fan belt.
10. In case of the wiring harnesses connected to the vehicle body and vibrating components such as engine, to avoid
damage, do not bind the harnesses without marginal length.
GENERAL
REXTON SM - 2004.4
9A-5
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN