Pressure Leakage Test With Scan-100 - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

PRESSURE LEAKAGE TEST WITH SCAN-100

1. When performing the static test for injector back leak Volume, the fuel pressure leakage test with Scan-i should be
done simultaneously. And, the fuel pressure leakage test with Scan-i can be done separately.
2. Test Conditions:
• No defective or faulty sensors and components in fuel system: checked by Scan-i
• Coolant temperature: over 60°C
3. The diagnosis procedures with Scan-i are as below:
1) Install the Scan-i to the diagnostic connector. Select
"DIAGNOSTICS" and press "ENTER" in "MAIN MENU"
screen. Select "REXTON" and press "ENTER" in "VEHICLE
SELECTION" screen.
2) Select "ECU" and press "ENTER" in "CONTROL UNIT
SELECTION" screen.
3) Select "LEAK DETECTION" and press "ENTER" in
"FUNCTION SELECTION" screen.
DIAGNOSIS
DI ENG SM - 2004.4
DI10-191
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN