C1 Clutch Overdrive Shaft And Input Shaft Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A2-188
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
C1 Clutch Overdrive Shaft and Input
Shaft Assembly
Tools Required
0555-336260 Clutch Pack Clearance Kit
Notice
• Ensure that the snap rings are fitted correctly.
• Check pistons for cracks, especially the C1 piston.
• Do not mix clutch piston return springs.
• If the C1/C2 clutch packs separate from the C3 clutch
pack, make sure the No. 6 bearing doesn't drop out of
the bearing retainer.
1. Check the overdrive shaft grooves for any defect.
2. Coat the sealing rings, large and small, with petro-leum
jelly and fit them to the overdrive shaft. The sealing rings
may be held in place with a small amount of petroleum
jelly.
Y220_3A20X0
3. Assemble the clutch plate and disc into the cylinder in
the following sequence:
• Steel plate
• Friction disc
• Steel plate
• Friction disc
• Steel plate
• Steel plate ( 0574-000013, `014, `015, `016, `019,
`022), or friction disc (0574-000012 & `017)
• Steel plate (selective)
• Friction disc
• Steel plate (selective)
Y220_3A20Y0
• Friction disc
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4