Wheel Joint Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Assembly
1. Assemble in the reverse order of disassembly.
2. Install the joint assembly.
• Insert the joint assembly into the drive axle shaft until
the circlip opens slightly.
(1) Keep the openings with screwdriver.
(2) Insert the joint assembly until it reaches to the circlip
groove.
3. Fill the specified grease in the joint housing.
Capacity
Notice
Use only specified grease. Otherwise, the joint and
boot may be damaged.
Notice
Replace the boot clamps with new ones.
4. Check whether the joint moves freely to any direction.
Check the clamping connections for leaks.
Notice
Replace the wheel joint as an assembly.
FRONT AXLE
REXTON SM - 2004.4
80 ~ 90 g
4A-27
Y220_04A068
Y220_04A069
04A-084
Y220_04A070
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN