Ignition Key Hole Illumination; Battery Saver - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

9B-20

IGNITION KEY HOLE ILLUMINATION

1. The ignition key hole illumination comes on when opening the door while the ignition key is removed.
2. The ignition key hole illumination stays on 10 seconds after closing the door in step 1.
3. The ignition key hole illumination stops when turning "ON" the IGN 1 switch or when receiving the lock signal from
remote control key within 10 seconds.
Notice
This function is not available in the immobilizer equipped vehicle.

BATTERY SAVER

1. The tail lamp relay output is "OFF" when removing the ignition key from the ignition switch and opening and then
closing the door while the tail lamp is coming on.
2. The tail lamp relay output is "OFF" when inserting the ignition key into the ignition switch after completion of step 1.
* This function is not available when the ignition key is removed.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Automatically goes off Automatically goes off
Y220_09B066
Y220_09B067
ELECTRIC SYSTEM
REXTON SM - 2004.4