SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 854

3C-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4. Unscrew the bolts and remove the clutch cover, pressure
plate and clutch disc.
Notice
Be careful not to drop the pressure plate and clutch
disc.
Installation Notice
Tightening torque
Y220_03C011
5. Remove the oil pipe and the adapter from the clutch
housing.
Y220_03C012
6. Unscrew the nut (1) at the inside of clutch housing and
remove the oil pipe.
Installation Notice
Tightening torque
7. Unscrew three bolts (2) on cylinder input shaft and remove
the concentric slave cylinder.
Installation Notice
Tightening torque
Y220_03C013
8. Remove the spacer from input shaft.
9. Install in the reverse order of removal.
Notice
• Before installation, clean all the components.
• Do not re-use the discharged clutch fluid.
• Apply a small amount of clutch fluid on the internal
components such as piston.
• Replace parts if necessary.
Keep the specified tightening torque.
Y220_03C015
1.0 ~ 1.6 kgf m
2.0 ~ 2.5 kgf m
1.0 ~ 1.6 kgf m
CLUTCH
REXTON SM - 2004.4