Brake Booster Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

8A-16
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BRAKE BOOSTER
Removal and Installation
Preceding work: Drain the oil.
1. Remove the master cylinder assembly and pull out the
cotter pin from brake booster push rod.
2. Remove the clevis pin.
Y220_08A028
3. Remove the booster mounting nuts.
Y220_08A029
4. Remove the brake booster.
5. Install in the reverse order of removal.
Notice
Always bleed the air from the brake system after
replacing the brake booster.
Y220_08A065
BRAKE SYSTEM
REXTON SM - 2004.4