Pump Cover And Converter Support - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A2-190
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
13. Assemble the C1/C2/C4 clutch assembly to the C3 clutch
and sun gear assembly.
14. Install this assembly in the transmission case.
Y220_3A21B0

Pump Cover and Converter Support

Notice
• Do not wash the nose of solenoids in solvent.
• Ensure that the correct "O" ring is fitted for the
application.
• Be careful not to damage the needle bearings on the
assembly. Avoid any axial impact loads during
assembly.
• Check the transmission end float. This will help to detect
any missing parts or incorrect assembly.
1. Check the pump body for any damage, chips or
irregularity. Check that the bush is firmly staked in the
drive gear.
2. Install the seal flush with the front face of the pump body.
3. Lubricate the pump bush, and the drive and driven gears,
with automatic transmission fluid.
Y220_3A21C0
4. Install the pump driven gear and the pump drive gear into
the pump body.
5. Using a straight edge and thickness gauge, check that
the clearance between pump face and gears is 0.04 ~ 0.
018 mm.
6. Lubricate the pump body "O" ring with automatic
transmission fluid and fit it to the pump body. Put the
pump body to one side.
Y220_3A2810
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4