8A-22
STOP LAMP SWITCH CHECK
No continuity
Plunger
BRAKE BOOSTER CHECK
Normal
Engine stop
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Connect the multimeter to stop lamp switch connector and
check if the continuity exists when pushing in the plunger. If
the continuity doesn't exist, the stop lamp switch is normal.
Continuity
Y220_08A052
1. Let the engine run for 1 ~ 2 minutes and stop it. If the
brake pedal stroke is shortened as pumping the brake
pedal, the system is normal. If not, the system is
defective.
2. Depress the brake pedal several times with engine off. If
Faulty
the brake goes down when starting engine with pedal
depressed, the system is normal. If not, the system is
defective.
3. Depress the brake pedal when the engine is running. If
the pedal height is not changed when stop the engine,
the system is normal. If not, the system is defective.
Y220_08A053
Engine running
Y220_08A054
BRAKE SYSTEM
REXTON SM - 2004.4