Pump - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A2-170
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Pump

Notice
The following valves are housed in the pump cover:
• Solenoid 7
• Converter clutch control valve
• Converter clutch regulator valve
• Primary regulator valve
1. Remove the wiring loom retainer plate and remove
solenoid 7 with a T30 Torx bit.
2. Remove the five washer head bolts from the cover plate
using a multi-point 8 mm socket.
3. Remove the five Torx head screws from the cover plate
with T30 Torx bit. Note that the long screw holds the
pump body to the pump body cover.
Notice
Do not strike the converter support tube to loosen
the pump body.
Y220_3A2770
4. Separate the pump body from the pump cover.
5. Remove the cover plate, gasket and seal from the cover.
Y220_3A2780
6. Remove the ball check valve and one spring from the
pump cover.
Y220_3A2790
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4