Table of Contents
Advertisement
9D-40
Auto Light Operation and Turning on Condition
Switch operations by function
1. Turn on the ignition switch and operate the multi-function switch in the order of OFF → position lamp → headlamp
→ AUTO → switch.
2. Turn on/off the position lamp, headlamp and switch.
3. Turn on the AUTO switch. At this moment, position lamps and headlamps come on automatically if brightness of
light that reflected on the photodiode in the auto light sensor unit is the same as voltage that set by software in
CPU.
4. If operate position lamp and headlamp switch manually again, the lamps turn on/off according to switch operations
not by brightness of light that detected by sensor.
5. When ignition switch is removed, position lamps and headlamps turn off.
Turning on conditions
Lamp
Brightness
For ON
For OFF
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_09D200
Position lamp ON condition
30.5 ± 5 (LUX)
60.5 ± 5 (LUX)
Auto Light Sensor Unit Terminal
1. System power supply
2. Auto light switch
3. Reserved
4. Headlamp relay
5. Position lamp relay
6. System ground
Headlamp ON condition
8.9 ± 3 (LUX)
17.2 ± 3(LUX)
Operation delay time
0.5 ± 0.1 sec.
3 ± 1 sec.
SWITCHES
REXTON SM - 2004.4
Hide quick links:
Advertisement
Table of Contents
