Replacement Of Refrigerant Connection - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3. Measure the amount of the discharged oil. If the the
amount of the discharged oil is below 70 cc, it means
the oil leak. Check the connections of the system and
repair or replace as needed.
4. Check the oil contamination and add the oil or adjust the
oil level.
Notice
For contaminating the oil by the dust or the foreign
material, charge the refrigerant in the system and
clean the receiver-drier.
REPLACEMENT OF REFRIGERANT
CONNECTION
1. When connecting a O-ring type, apply compressor oil to
portions shown in illustration. Be careful not to apply oil
to threaded portion.
Notice
Use the approval compressor oil.
2. O-rings must be closely attached to inflated portion of
pipe and always replace used O-rings.
3. After inserting the pipe to the union, tighten the nut by
hand as much as possible and tighten the nut with the
specified torque.
A/C SYSTEM
REXTON SM - 2004.4
10C-21
Y220_10C030
Y220_10C031
Y220_10C032
Y220_10C033
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN