Door Control - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Door Control

1. The door unlock relays output is "ON" when the driver's door lock switch turns "ON" while the ignition key is
inserted into ignition switch and the driver's door opens.
2. The door unlock relays output is "ON" when the passenger's door lock switch turns "ON" while the ignition key is
inserted into ignition switch and the passenger's door opens.
3. The door unlock relay output is "ON" when the door lock switch turns "ON" within T3 after closing door while the
ignition key is inserted into ignition switch and driver's door opens.
4. The door unlock relay output is "ON" when closing the door within T3 after turning "ON" the door lock switch while
the ignition key is inserted into ignition switch and driver's door opens.
5. The unlock relay output is "ON" when any of unlock conditions are changed within T1.
6. The unlock relay output will not be "ON" when removing the ignition switch from the ignition switch from T1 after
changing the conditions.
(The output is "OFF" when removing the ignition key with unlocked for 5 seconds)
(This function is not available when IGN 1 switch is "ON" and vehicle speed is over 3 km/h)
DR : Driver's door
PS : Passenger's door
RR : Rear door
ELECTRIC SYSTEM
REXTON SM - 2004.4
T1 : 0.5 ± 0.1 sec T2 : 5 ± 0.5 sec T3 : Within 0.5
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
9B-13
Y220_09B059