Differential Joint Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

4A-24
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

DIFFERENTIAL JOINT ASSEMBLY

Disassembly
1. Remove the drive axle.
2. Remove the joint boot clamp.
(1) Remove the larger boot clamp.
• Compress the clamp tabs with special tool.
(2) Remove the smaller boot clamp.
• Unfold the clamp holding with a screwdriver.
Y220_04A059
3. Separate the joint housing from boot.
(1) Boot
(2) Joint housing
Y220_04A060
4. Remove the grease on the joint assembly.
5. Remove the tripod joint.
(1) Pull out the circlip.
(2) Pull out the tripod joint.
Y220_04A061
6. Remove the drive axle shaft boot.
Y220_04A062
FRONT AXLE
REXTON SM - 2004.4