Clutch Fluid Pipe - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Clutch Fluid Pipe

Removal and installation
1. Draw out the fluid.
2. Unscrew the bolt and remove the supply pipe from clutch
master cylinder.
3. Unscrew the supply pipe bolt (2) and remove primary oil
pipe from clutch fluid chamber.
4. Unscrew the bolt and remove the secondary clutch fluid
pipe from clutch release cylinder.
5. Install the pipes. Be careful not to mix the pipes.
Notice
• Make sure to bleed the air from the system after
installation.
• Check each pipe bolt for oil leaks.
• Clutch pipes are reusable. However, must check
the pipes for damages and cracks.
CLUTCH
REXTON SM - 2004.4
3C-15
Y220_03C026
Y220_03C027
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN