Thrust Ring (Washer); Lubrication - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Thrust Ring (Washer)

When the driving force from engine is transmitted to the output shaft of transmission, each shaft and gear assembly
receives the axial force and this force acts as a resistance to rotating gears.
Input shaft

Lubrication

Transmission oil: ATF DEXRON II or III
Initial installation for taper roller bearing and needle roller bearing, lubrication for shift rail: MoS2 Grease
Installation Notice
Sealant on oil drain screw during installation: Loctite DRI LOC 200
Tightening torque: 40 ~ 50 Nm
TSM54/52 MANUAL TRANSMISSION
REXTON SM - 2004.4
Thrust ring 1
3/4
synchronizer synchronizer
Counter gear assembly
Head set
3rd 2nd
gear
gear gear
Oil drain screw
Thrust washer
1/2
5/R
synchronizer
1st Reverse
gear gear
Output shaft
Thrust washer
5th
gear
Oil level
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3B-23
Y220_03B026
Y220_03B027