SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 891

3D-30
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Support the transfer case with jack and remove the front
and rear propeller shafts from the transfer case.
Installation Notice
Tightening
torque
Y220_03D029
8. Remove the center mounting nuts and end sides
mounting bolts of the cross member and then remove
the cross member.
Installation Notice
Tightening torque (1)
Tightening torque (2)
9. Remove the insulator mounting bolts.
Installation Notice
Tightening torque
Y220_03D030
10. Unscrew the mounting bolts and remove the transfer
case.
Installation Notice
Tightening torque
Notice
Apply long-term grease to inner spline of the transfer
case input shaft.
11. Install in the reverse order of removal.
Y220_03D031
Front 81 ~ 89 Nm
Rear 70 ~ 90 Nm
21 ~ 35 Nm
62 ~ 93 Nm
25 Nm
19 ~ 30 Nm
PART TIME
REXTON SM - 2004.4