Defrost Switch; Air Source Selection Switch - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

10B-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Air Conditioner Switch
When pressing this switch, the indicator light (
and the air conditioner starts to operate. When you press the
switch again, the air conditioner stops operation and indicator
goes out. AUTO indicator doesn't come on during the switch
operation.
Notice
When the ambient temperature is extreme low, the air
conditioner may not operate to protect the air conditioner
system even the switch is pressed and the indicator came
on.
Y220_10B016

Defrost Switch

When pressing this switch, the airflow direction will be changed
to windshield and door glasses, the air conditioner operates
automatically and outside air comes in. At this moment, the
indicator ( ) comes on. When the defrosting is completed,
press the switch to return to normal operations. When the
switch is operated, the air conditioner indicator (
air intake mode indicator (
AUTO indicator goes out.
Y220_10B017

Air Source Selection Switch

By pressing the switch, outside air intake mode and recircu-
lation mode changes alternatively. When the fresh air intake
mode is selected, indicator (
mode is selected (
is operated, the AUTO indicator goes out.
Notice
• Press this switch when driving in dusty conditions or to
avoid traffic or outside fumes, and when quick cooling
or heating of the passenger area is required.
Y220_10B018
• Continued operation in the recirculation mode could
cause interior to become stuffy and windows to fog up.
Use the recirculation mode in short period of time.
Note
If pressing (
recirculation mode, air source selection is automatically
changed to outside air intake mode.
) comes on. At this moment,
) comes on. Recirculation
) indicator comes on. When the switch
) or ( ) switch while the air source is
HEATER & VENTILATION SYSTEM
) comes on
) and fresh
REXTON SM - 2004.4