SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 747

3A2-198
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
21. Install solenoid 5. Ensure that the solenoid is pushed
firmly into the valve body by the retainer and that the
screw is tightened to specification.
Installation Notice
Tightening torque
Y220_3A21W0
22. Install the detent spring assembly (spring, support plate
and screw), ensuring that the screw is tight-ened to
specification. Check the spring for wear or damage.
Installation Notice
Tightening torque
Y220_3A21X0
23. Install the manual shift valve.
Notice
Be aware that the manual valve will fall out of the
valve body.
Y220_3A21Y0
24. Align the valve body assembly on the transmission case
and install the manual valve lever to manual valve link.
Fit the long end of the link to the manual valve first. Install
the securing bolts and tighten to specification in the
specified sequence.
Installation Notice
Tightening torque
Y220_3A21Z0
8 ~ 12 Nm (71 ~ 106 lb-in)
20 ~ 22 Nm (15 ~ 16 lb-ft)
8 ~ 13 Nm (71 ~ 115 lb-in)
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4