Adaptor Housing Assembly; Front Servo Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Adaptor Housing Assembly

1. Install a new seal to the adaptor housing.
2. Position a new gasket onto the adaptor housing.
Notice
Do not use petroleum jelly to hold the gasket in
position.
3. Apply additional Loctite 202 or equivalent as required to
the adapter housing bolts. Install the adaptor housing
and torque the bolts to specification.
Installation Notice
Tightening torque

Front Servo Assembly

1. Lubricate the cover "O" ring with automatic transmission
fluid and fit to the cover.
2. Lubricatethepiston "O" rings with automatic trans-mission
fluid and fit to the piston.
3. Assemble the piston, push rod, spring, belleville washer,
seat and retaining ring.
4. Fit the piston push rod assembly into the front servo
cover.
5. Install the front servo block and spring into the case.
6. Install the front servo assembly into the case.
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
30 ~ 35 Nm (22 ~ 26 lb-ft)
3A2-179
Y220_3A20B0
Y220_3A20C0
Y220_3A2520
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN