4Wd Switch; Vehicle Equipped With Manual Transmission; Vehicle Equipped With Automatic Transmission; Mode Switching - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

9D-10

4WD Switch

4WD indicator
Full-Time Transfer Case: only have
"4WD LOW" Indicator
Part-time 4WD switch
• "2H" (2-Wheel drive)
This is rear wheel drive with high speed. Use this for
normal driving. This position gives greater economy,
quieter ride and least drive train wear.
• "4H" (4-Wheel Drive, High)
Use this for driving on wet or slippery roads such as
roads with snow, mud or sand. This position provides
greater traction than 2-wheel drive. The front hubs will
be locked automatically.
• "4L" (4-Wheel Drive, Low)
Use this for maximum power and traction. Use "4L" for
climbing or descending steep hills, hard pulling in sand,
mud or deep snow.

Vehicle equipped with manual transmission

2H ↔
Description
Driving conditions below 70 km/h
Clutch operation No need
Shift position
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Full-time 4WD switch
↔ ↔ 4H ↔ ↔ ↔ ↔ 4L ↔ ↔
2H, 4H ↔
Stop
Depressing the
clutch pedal
- N (Neutral)

Vehicle equipped with automatic transmission

2H → → → → → 4H
Description
Driving conditions below 70 km/h
Shift position
Switch position
• "4H" (4-Wheel Drive, High)
Use this for normal driving.
• "4L" (4-Wheel Drive, Low)
Use this for maximum power and traction. Use '4L' for
climbing or descending steep hills, hard pulling in sand,
mud or deep snow.

Mode switching

Description
Driving conditions
Shift position
Connector
Y220_09D145
2H, 4H → → → → → 4L
Stop
- N (Neutral)
↔ ↔ 4L ↔ ↔
4H ↔
Stop
N (Neutral)
SWITCHES
REXTON SM - 2004.4