Table of Contents
Advertisement
8A-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
After Replacing Master Cylinder
1. Add oil after replacing the master cylinder.
2. Pump the brake pedal several times until the hydraulic
pressure is generated. Then, keep the pedal depressing.
3. Loosen the pipe screw at the outlet port in master cylinder
to bleed the air.
4. Repeat step 3 until clear brake fluid comes out of air
bleed screw.
5. If the hydraulic pressure is not properly generated during
pumping the brake pedal, bleed the at the outlet pipe in
Y220_08A047
hydraulic unit and wheel.
After Replacing Hydraulic Unit
1. Add oil after replacing the hydraulic unit.
2. Pump the brake pedal several times until the hydraulic
pressure is generated. Then, keep the pedal depressing.
3. Loosen the pipe screw at the outlet port in hydraulic unit
to bleed the air.
4. Repeat step 3 until clear brake fluid comes out of air
bleed screw.
5. If the hydraulic pressure is not properly generated during
pumping the brake pedal, bleed the at the wheel.
Y220_08A048
BRAKE SYSTEM
REXTON SM - 2004.4
Hide quick links:
Advertisement
Table of Contents
