SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1034

6A-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
10. Install the fuse box, cables and switches and install the
panel side cover.
Notice
Insert the side cover into the molding as shown in
the figure.
Y220_06A028
11. Install the steering wheel with aligning the marks on the
steering column shaft and steering wheel nut.
Notice
Apply grease on the shaft spline to insert it easily.
Y220_06A029
12. Connect al the connectors and install the horn pad.
Note
When installing the horn pad, insert the safety pin
into the wheel hole and align the shaft end to pad
groove.
13. Tighten the screws at both sides of steering wheel and
connect the negative battery cable.
Y220_06A030
STEERING COLUMN
REXTON SM - 2004.4