SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1140

Installation
1. Place the front disc assembly to the knuckle and tighten
the lock nut with the specified value. (Full-time 4WD)
2. Place the disc, locking hub and hub range and tighten
the mounting bolts. (Part-time 4WD)
3. Install the caliper assembly to front disc.
Tightening torque
4. Install the brake hose to caliper cylinder.
Tightening torque
Notice
Replace the copper washer with new one.
5. Bleed the air from the brake system after replacing the
brake pads.
Air bleed screw
tightening torque
FRONT BRAKE
REXTON SM - 2004.4
85 ~ 105 Nm
20 ~ 30 Nm
7 ~ 13 Nm
Full-time
Part-time
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
8B-7
Y220_08B012
Y220_08B013
Y220_08B014