Power Steering Gear Box - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Power Steering Gear Box

1. Remove the tie rod from steering knuckle. Remove the
split pin and slotted nut from tie rod end and pull off the
tie rod by using special tool.
2. Unscrew the joint blots in steering lower shaft and remove
the lower shaft and gear box.
3. Remove the center bolts in gear box and left mounting
bolts. Remove the supply and return pipe bolts.
3-1. Disconnect the solenoid valve connector.
POWER STEERING
REXTON SM - 2004.4
6C-9
Y220_06C007
Y220_06C008
Y220_06C009
Y220_06C010
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN