SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 792

3B-26
Symptom
Transmission locked in
one gear
Transmission noise
Transmission leakage
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Cause
Worn or damaged synchronizer.
Worn or damaged gears.
Improper or low transmission oil.
Loose bolts or other attaching parts.
Improper flywheel housing to engine
crankshaft alignment.
Noisy transmission bearing.
Noisy gears.
Leakage from transmission.
Vent or breather clogged.
Too much oil.
Loose bolts at sealing faces.
Improperly applied sealant.
Worn or damaged oil seal.
Action
Check worn or damaged synchronizer
parts and replace if necessary.
Check worn or damaged gears and replace
if necessary.
Add or drain and replace with proper oil.
Tighten as specified.
Realign correctly.
Check bearings, bearing rollers and parts
for wear or damage. Replace if necessary.
Check for worn or damaged gears
(including speedometer gear). Replace if
necessary.
Clean all exposed surfaces, then check for
leaks.
Clean or replace vent or breather.
Check oil level.
Tighten as specified.
Clean leaking surfaces. Reapply sealant.
Replace oil seal.
TSM54/52 MANUAL TRANSMISSION
REXTON SM - 2004.4