SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1287

9B-32
7. Operations when removing and installing the battery
Removed
Normal Armed
Armed Ready
Armed
Warning
Warning Completion
RELOCK Ready
System Power Consumption
1. The "SLEEP" mode is activated to save the system power when:
- All doors (driver's door, passenger's door, rear doors, tailgate, hood) are closed
- The IGN 1 switch and the IGN 2 switch are turned "OFF"
- Driver's and passenger's door lock switch and the ignition key switch are not changed for 2 seconds while the
door unlock switch and the tailgate cylinder switch are turned "OFF"
2. The "WAKE UP" mode is activated immediately after any of above requirements is failed (canceling the "SLEEP"
mode).
3. The "WAKE UP" mode is activated immediately after inputting the "KEYLESS" signal (canceling the "SLEEP"
mode).
4. The above output conditions and ready conditions are cancelled after a certain period of waiting when some outputs
(room lamp, key hole illumination, tail lamp, power windows etc.) are "ON" in the conditions in step 1 and all the
doors are closed for 30 seconds after unlocking by keyless system. The "SLEEP" mode is activated when the
driver's or passenger's door lock switch and the ignition switch is not changed for 2 seconds.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Installed
Normal Armed Warning Remark
ELECTRIC SYSTEM
REXTON SM - 2004.4