Front Coil Spring Reassembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Reassembly
1. Compress the coil spring to the specified length, assemble
all components and tighten the lock nut.
Compressed length
Tightening torque of lock nut
Notice
1. Make sure to install the coil spring in correct
direction.
2. If you cannot tighten the nut with the specified
value, tighten the nut until the distance between
the upper face of lock nut and top end of the bolt
is 23 ~ 24 mm.
2. Check the installation conditions of coil spring.
• Make sure to install the coil spring in correct
direction.
• Make sure to seat the coil spring onto the spring
seat.
Notice
One of the upper bracket bolts should be at the same
longitudinal position with the projected area of the
lower yoke. If not, the coil spring assembly cannot
be installed.
FRONT SUSPENSION
REXTON SM - 2004.4
344 mm
25 ~ 40 Nm
7A-17
Y220_07A031
Y220_07A032
Y220_07A033
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN