Oil Level Check And Change; Maintenance And Repair; 4H, 4L And 4Wd Check Indicator - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

MAINTENANCE AND REPAIR

OIL LEVEL CHECK AND CHANGE

1. Oil level check
• Clean the oil level plug and surroundings.
• Remove the oil level plug and check whether oil is spilled
out.
• Add oil if necessary.
• Tighten the oil level plug.
Installation Notice
Tightening torque
2. Oil change
• Clean the oil level plug and surroundings.
• Place a suitable container under the transfer case.
• Remove the oil and tighten the drain plug.
• Fill the oil through the oil level plug until oil begins to
drip out.
• Tighten the oil level plug.
3. Cautions for oil level check and plugs
tightening
• Do not use an impact wrench to remove or tighten the
oil level plug or drain plug since this will damage the
threads in the transfer case.

4H, 4L AND 4WD CHECK INDICATOR

When the ignition switch turns on, 4H, 4L and 4WD CHECK
indicators come on for 0.6 seconds and the go off.
Notice
If the indicators do not come on, check the related bulb,
the wiring harness and TCCU.
PART TIME
REXTON SM - 2004.4
19 ~ 30 Nm
Drain
plug
EFFECTIVE DATE
3D-25
Oil level
plug
Y220_03D020
Oil level
plug
Y220_03D021
Y220_03D022
CHANGED BY
AFFECTED VIN