Dtc (Diagnosis Trouble Code) Of Dc5At - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DTC (Diagnosis Trouble Code) of DC5AT

Trouble
Defectives
Code
P2000 Faulty TCU internal watchdog test
P2001 Faulty TCU internal watchdog
function
P2002 Faulty TCU external watchdog test
P2003 Faulty TCU external watchdog
function
P2004 Faulty TCU Clock
P2005 Faulty TCU RAM
P2006 Faulty TCU RAM CAN-Controller 1
P2007 Faulty TCU RAM CAN-Controller 2
P2008 Faulty TCU ROM
P200A Faulty TCU EEPROM
P200B Faulty TCU CPU (internal)
P200C Faulty TCU program control
P2010 No TCU variant coding
P2011 Faulty TCU variant coding
P2012 Faulty TCU checksum
P2013 Faulty TCU (internally)
P2100 Defective 1-2, 4-5 shift solenoid valve
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- When the TCU internal checksum is different from scanner checksum.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis.
- Check harness contact.
- Self-diagnosis.
- Check harness contact.
- Self-diagnosis with IGN ON.
- When the TCU coding is not exist.
- Check again after TCU coding.
- Self-diagnosis with IGN ON.
- When the TCU coding is faulty.
- Check again after TCU coding.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- Self-diagnosis with IGN ON.
- Cycle the IGN switch from OFF to ON. Check and replace TCU if the
trouble still exists.
- When 1-2 or 4-5 shift solenoid valve is defective.
- Measure the resistance of 1-2 or 4-5 shift solenoid valve (turn the IGN
OFF, then and disconnect TCU connector).
• TCU connector terminals: B12, B3
• Specified value: 3.8 ± 0.2 Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in "D" range.
- Check the related harness for open, short and contact.
Action
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3A1-55