SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 853

Removal and Installation
1. Unscrew nut and disconnect the clutch fluid hose (1)
from adaptor. Simultaneously, disconnect the backup
lamp switch (2) connector.
2. Unscrew the clutch housing bolts and remove the clutch
housing with transmission. (refer to Manual Transmission
section in this manual)
Installation Notice
Tightening torque
Notice
Separating the clutch housing and transmission for
removal may cause damage the concentric slave
cylinder.
3. Insert the centering pin (special tool) into center spline.
Loosen the clutch cover bolts 1/2 turns in crisscross
sequence until the spring tension is released.
Notice
Do not remove the bolts at a time, or clutch cover
may be damaged or deformed.
Installation Notice
Tightening torque
CLUTCH
REXTON SM - 2004.4
5.5 ± 0.5 kgf m
2.4 ± 0.3 kgf m
3C-9
Y220_03C014
Y220_03C008
Y220_03C010
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN