Tod Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

TOD
Removal and Installation
1. Disconnect the negative battery cable.
2. Lift up the vehicle and fix it safely.
3. Place the empty container to collect the draining oil.
4. Remove the drain plug and drain the oil. Reinstall the
drain plug.
Notice
Oil drain should be along with whole transfer case
disassembly and assembly.
5. Disconnect transmission extension wiring connector from
rear side of transfer case.
Notice
When disconnect connector, make sure on direction
of locking tab towards inside.
6. Disconnect the shift motor/clutch coil connector (black,
7-pin) and front and rear speed sensor connector (white,
7-pin) at the rear top section of the transfer case.
7. Remove the breather hose.
8. Support the transfer case with jack and remove the front
propeller shafts bolts (4ea).
Installation Notice
Tightening torque
TOD
REXTON SM - 2004.4
81 ~ 89 Nm
3E-33
Y220_03E018
Y220_03E019
Y220_03E020
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN