Front Wiper Motor Speed; Front Wiper Auto Stop - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

INSPECTION

Front Wiper Motor Speed

1. Disconnect the wiper motor connector.
2. Connect the positive battery terminal to No. 3 terminal
and the negative battery terminal to No. 6 terminal.
3. Check if the wiper motor operates with "LO" speed.
4. Connect the positive battery terminal to No. 3 terminal
and the negative battery terminal to No. 5 terminal.
5. Check if the wiper motor operates with "HI" speed.

Front Wiper Auto Stop

1. Run the wiper motor with "LO" speed.
2. Stop the wiper motor by disconnecting No. 6 terminal in
other than "OFF" position.
3. Connect the No. 2 and No. 6 terminals.
4. Connect the positive battery terminal to No. 3 terminal
and No. 5 terminal to ground.
5. Check if the wiper motor stops at "OFF" position.
WIPER & WIPER MOTOR/HORN
REXTON SM - 2004.4
P(Parking)
IGN(+)
HI LO
Ground(G101)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
9H-7
Y220_09H368 Y220_09H425 Y220_09H433
Y220_09H434
Y220_09H369