SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 903

Shift Motor
When selecting a position in 4WD switch (4H/4L), TOD control unit exactly changes the motor position to 4H and 4L by
detecting the electric signals from position encoder that monitors motor position.
Pin
A
B
C
D
E
F
G
Speed Sensor and Clutch Coil
The front and rear speed sensor utilizes the hall effect. These sensors generate 0V and 5V of square type digital wave
according to the rotation of the wheel with teeth of transfer case front and rear output shaft. The speed signal from front
and rear propeller shaft is entered into TOD control unit.
Pin
H
I
J
K Front speed sensor voltage (5V)
L Rear speed sensor voltage (5V)
M
N
TOD
REXTON SM - 2004.4
Function
Position 4 shift
Shift motor LO – HI (clockwise)
Position 3
Position 2
Position 1
Position ground
Motor HI – LO (clockwise)
Function
Clutch coil
Front speed sensor ground
Front speed sensor signal
Rear speed sensor signal
Front speed ground
D (Brown/
White)
C (White)
B (Yellow)
A(Violet)
Rear view of connector
K (Green)
J (Black/
Light green)
I (Gray/Red)
H (Brown)
Rear view of connector
3E-7
E (Purple/White)
F (Yellow/White)
G (Purple)
Y220_03E005
L (Green)
M (Blue)
N (Gray/Red)
Y220_03E006
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN