Steering Column - Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

6A-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Steering Column - Installation

1. Insert the steering column lower shaft into the gear box
(spline) and tighten the bolts.
Notice
• Install the lower shaft so that the bolt can be
inserted into the area without spline.
• Install it with aligning the marks.
Tightening torque
Y220_06A020
2. Insert the steering column shaft into lower shaft with
aligning the marks.
Notice
• Install the steering column shaft so that the bolt
can be inserted into the area without spline.
• Install it with aligning the marks.
Tightening torque
Y220_06A021
3. Tighten the steering column mounting bolts to floor.
Tightening torque
4. Tighten the steering column shaft upper mounting bolts.
Tightening torque
Y220_06A022
5. Connect all the connectors for steering column.
Y220_06A023
25 ~ 30 Nm
25 ~ 30 Nm
18 ~ 25 Nm
20~ 25 Nm
STEERING COLUMN
REXTON SM - 2004.4