On-Vehicle Service; Transmission Removal And Installation Procedure; Repair Instructions - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

REPAIR INSTRUCTIONS

ON-VEHICLE SERVICE

TRANSMISSION
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Disconnect the connectors from transfer case.
3. Disconnect the speedometer connector from transfer
case.
4. Disconnect the inhibitor connector, gear position sensor
connector and transmission case connector.
5. Remove the rear propeller shaft bolts.
Installation Notice
Tightening torque
6. Remove the cross member bolts and nuts.
Installation Notice
Tightening torque
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
70 ~ 80 Nm (52 ~ 59 lb-ft)
70 ~ 80 Nm (52 ~ 59 lb-ft)
3A2-159
Y220_3A2080
Y220_3A2090
Y220_3A2100
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN